手順2に変更
- Austin Blakelyによって編集
承認済みの編集 : Austin Blakely
- 前
- 後
- 変更なし
手順ライン
[* red] Use a Phillips #0 screwdriver to unscrew the four screws surrounding the hard drive. | |
- | [* black] Disconnect the cable that is connected to the hard drive by sliding it horizontally away from the connector. |
- | [* black] Remove the hard drive. |
- | [* icon_note] You may need to further remove the metal mounting brackets from your old hard drive then install them on your new hard drive before reinstallation. |