手順2に変更
- Roberto Apodacaによって編集
承認済みの編集 : Roberto Apodaca
- 前
- 後
- 変更なし
手順ライン
| [* black] Use your 1x64 driver kit and your 0 screwdriver, unscrew the 4 screws from each side shown. | |
| - | [* black] Before you completely remove the hard drive, disconnect the power connection that is shown on the bottom left. |
| [* black] Place the 4 screws on a magnetic project mat and place the hard drive to a dry and secure place. |