メインコンテンツにスキップ

手順 3 への変更

- Kevin Coleによって編集

承認済みの編集 : Kevin Cole

削除
追加
変更なし

手順ライン

[* black] Once all wires and screws have been removed, remove the motherboard from the printer chassismotherboard.
[* black] Once all wires and screws have been removed, remove the motherboard from the printer chassismotherboard.
[* orange] These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.
[* icon_caution] If you do not know how to operate a soldering iron, do not attempt to finish this guide.
[* orange] De-solder these eight solder joints on the bottom of the motherboard.
[* icon_note] When reinstalling the motherboard back into the printer, solder the highlighted joints (in orange on the photo) back onto the PCB.