メインコンテンツにスキップ

手順 3 への変更

- Khutug Dorjsurenによって編集

承認済みの編集 : Khutug Dorjsuren

削除
追加
変更なし

手順ライン

[* black] Once all wires and screws have been removed, gently take the motherboard out of the printer.
[* orangered] These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.
[* orangered] These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.
[* icon_caution] If you do not know how to operate a soldering iron, do not attempt to finish this guide.
[* violetorange] De-solder these eight solder joints on the bottom of the motherboard.
[* violetorange] When reinstalling the motherboard back into the printer, solder the highlighted joints (in purple circleorange markers in the thirdsecond photo) back onto the PCBboard.
[* violetorange] De-solder these eight solder joints on the bottom of the motherboard.
[* violetorange] When reinstalling the motherboard back into the printer, solder the highlighted joints (in purple circleorange markers in the thirdsecond photo) back onto the PCBboard.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン