メインコンテンツにスキップ

手順 3 への変更

- nathan zorndorfによって編集

承認済みの編集 : nathan zorndorf

削除
追加
変更なし

手順ライン

[* black] Once all wires and screws have been removed, removegently take the motherboardmotherboard out of the printer.
[* black] Once all wires and screws have been removed, removegently take the motherboardmotherboard out of the printer.
[* orange] These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.
[* icon_caution] If you do not know how to operate a soldering iron, do not attempt to finish this guide.
[* orangeviolet] De-solder these eight solder joints on the bottom of the motherboard.
[* icon_noteviolet] When reinstalling the motherboard back into the printer, solder the highlighted joints (in orange onpurple circle in the third photo) back onto the PCB.
[* orangeviolet] De-solder these eight solder joints on the bottom of the motherboard.
[* icon_noteviolet] When reinstalling the motherboard back into the printer, solder the highlighted joints (in orange onpurple circle in the third photo) back onto the PCB.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン

画像3

削除