手順1に変更
- Bryce Nesbittによって編集
承認済みの編集 : Bryce Nesbitt
- 前
- 後
- 変更なし
手順ライン
| [title] Jump Start | |
| [* black] This miserable design actually sends line voltage up the hose to the switch, and back down again. The left and right contacts connect the motor. | |
| + | [* black] To start the motor without the hose, get insulated clip leads, apply power, and short the left and right terminals together. If the vacuum starts, you're on the right track. |