修理を始めるには コミュニティ ストア

手順3に変更

- E Textによって編集

承認済みの編集 : E Text

前
後
変更なし

手順ライン

-[title] Remove housing
-[* black] Once the housing has been split/cut apart, you should be able to pull off the section on the connector side.
+[title] Remove casing
+[* black] Once the casing has been split/cut apart, you should be able to pull off the section on the connector side.
[* black] The white rubber seal/gasket will probably come off, but this can be quite easily pushed back into place if needed.
-[* black] The section of housing on the cable side is harder to remove. Use the tip of the utility knife, or better still, a scalpel, to cut and pry it away from the main body.
+[* black] The section of casing on the cable side is harder to remove. Use the tip of the utility knife, or better still, a scalpel, to cut and pry it away from the main body.