メインコンテンツにスキップ

手順1に変更

Austin Blakelyさんによる編集

承認済みの編集 : Austin Blakely

変更なし

手順ライン

-[* red] Right above the battery socket, pull off the tab connected to the orange tape on the right.
-[* orange] Pull the tab to the left of the orange tab to open the wire housing.
-[* yellow] Gently pull out the wire going into the opening created by lifting the tab.
+[* red] Right above the battery socket, pop up the press fit connector at the end of the orange ribbon cable on the right.
+[* orange] Pry up the tab of the ZIF connector on the left to disengage the locking connector.
+[* yellow] Gently pull out the ribbon cable going into the opening created by lifting the tab.