手順5に変更
- Adam O'Cambによって編集
承認済みの編集 : Adam O'Camb
- 前
- 後
- 変更なし
手順ライン
| - | [* icon_note] If the adhesive gets |
|---|---|
| + | [* icon_note] If the adhesive gets hard to cut it is likely too cold. [guide|25705|Use your iOpener|new_window=true] to reheat it. |
| [* black] Insert a fourth opening pick under the top left corner of the rear glass. | |
| [* black] Slide the opening pick along the top edge of the phone to cut the adhesive. | |
| [* black] Leave the opening pick in the top right corner to prevent the adhesive from resealing. |