手順2に変更
- Tobias Isakeitによって編集
承認済みの編集 : Tobias Isakeit
- 前
- 後
- 変更なし
手順ライン
| [* icon_note] There's a little bit of adhesive under the loudspeaker. It's possible to remove the loudspeaker without heating the adhesive but in case you're having a hard time removing it, you can [guide|11677|use an iOpener] to soften the adhesive. | |
| [* black] Use the flat end of a spudger and slide it under the right side of the loudspeaker unit. | |
| - | [* black] |
| + | [* black] Pry up the loudspeaker unit until you can get a good grip. |
| [* black] Remove the loudspeaker unit. |