修理を始めるには コミュニティ ストア

手順2に変更

- koppie007によって編集

承認済みの編集 : koppie007

前
後
変更なし

手順ライン

[title] Free the keyboard
[* icon_caution] I recommend to use the ***iFixit Opening Picks*** for this step! Otherwise you could scratch/damage the keyboard or frame by metal on metal!
[* black] Place it between the keyboard and the frame. I started near the on/off button to make a opening.
[* black] Just go around the whole keyboard with the opening picks, slide it through every side of the keyboard, except for the under side (there are no clips there).
-[* black] Just free all the clips, you should hear some pops. ***Do not pull the keyboard out, just free it from the clips which are holding the keyboard.*** The clips that are holding the keyboard are pretty strong, so you need a little force to free it.
-[* black] After it's freed from all the clips, you can turn the keyboard towards your self. ***Do not remove the keyboard as it's still connected with some ribbon cables!***
+[* red] Just free all the clips, you should hear some pops. ***Do not pull the keyboard out, just free it from the clips which are holding the keyboard.*** The clips that are holding the keyboard are pretty strong, so you need a little force to free it.