メインコンテンツにスキップ

手順9に変更

JaosnTさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.
[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン

画像3

以前の画像はありません

追加