メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Andrew Optimus Goldheartさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the screw cover located on the bottom of the zune.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease it out. Do the same on the other side until it's worked free.
[* icon_caution] Warning: This is a brittle piece of plastic that will break if forced.
[* red] There should beOnce removed, two 2.6mm screws of size 2.6 mm on the bottom of the Zuneare exposed.
[* red] There should beOnce removed, two 2.6mm screws of size 2.6 mm on the bottom of the Zuneare exposed.