手順 4 への変更

- Tobias Isakeitによって編集

承認済みの編集 : Tobias Isakeit

削除
追加
変更なし

手順ライン

[* black] Once the screen is warm to the touch, apply a suction cup to the upper area of the phone right under the earpiece speaker.
[* icon_note] If the phone's screen is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Pull up the suction cup, and insert the tip of an opening pick under the displaydisplay where the earpiece speaker is located.
[* black] Pull up the suction cup, and insert the tip of an opening pick under the displaydisplay where the earpiece speaker is located.
[* black] Slide the opening pick to the top left corner of the phone to cut the adhesive.