メインコンテンツにスキップ

手順5に変更

Nathaniel Clarkさんによる編集

承認済みの編集 : Nathaniel Clark

変更なし

手順ライン

-[* black] Use a drill with some drill bits to remove the rivets from the door body by finding a bit size that is bigger than the size of the dimple in the head.
+[* black] Using a drill with some drill bits to remove the rivets from the door body by finding a bit size that is bigger than the size of the dimple in the head. This may need more than one round of drilling so do not be afraid to incrementally go up in bit size.
[* black] After drilling this out there will be an eyelet on the end of your drill and hear a ting of the back half falling to the ground this means you have dismounted the actuator