手順1に変更
手順ライン
| + | [* black] The back of the phone has adhesive around all edges, as well as additional adhesive shown in yellow. |
|---|---|
| + | [* icon_caution] Be careful around the cable for the fingerprint sensor (shown in red). |
| + | [* icon_note] The fingerprint sensor is attached to the back panel. |
| + | [* black] Start by heating the bottom of the phone and carefully using a metal spudger or a suction cup to lift the glass panel up enough to insert an opening pick. |
| + | [* black] Heat up each edge and move picks towards the top of the phone, leaving one pick inserted in each corner. |
画像1
以前の画像はありません
追加