メインコンテンツにスキップ

手順2に変更

TooMuchSauceさんによる編集

承認済みの編集 : TooMuchSauce

変更なし

手順ライン

[title] Remove Fan Cover
-[* black] Next, flip your laptop upside down and remove the 2 sets of screws highlighted in yellow with your Phillips 0 screwdriver, There are 2 sets of 2.
+[* yellow] Next, flip your laptop upside down and remove the 2 sets of screws highlighted in yellow with your Phillips 0 screwdriver, There are 2 sets of 2.
[* black] Then open the laptop to roughly 45 degrees and place it on its side as shown. From this position you can wiggle the dust cover off.
[* black] If you are having trouble then open or close the lid a little further. When you have it in the right position it will require no force, it will slide right off.