メインコンテンツにスキップ

手順2に変更

TooMuchSauceさんによる編集

承認済みの編集 : TooMuchSauce

変更なし

手順ライン

[title] Remove Fan Cover
-[* black] Remove the 2 sets of screws highlighted in yellow, There are 2 sets of 2. Then open the laptop to roughly 45 degrees and place it on its side as shown. From this position you can wiggle the dust cover off. If you are having trouble then open or close the lid a little further. When you have it in the right position it will require no force.
+[* black] Next, flip your laptop upside down and remove the 2 sets of screws highlighted in yellow with your Phillips 0 screwdriver, There are 2 sets of 2.
+[* black] Then open the laptop to roughly 45 degrees and place it on its side as shown. From this position you can wiggle the dust cover off.
+[* black] If you are having trouble then open or close the lid a little further. When you have it in the right position it will require no force, it will slide right off.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン