メインコンテンツにスキップ

手順 7 への変更

- Paul Barnfatherによって編集

承認済みの編集 : Paul Barnfather

削除
追加
変更なし

手順ライン

[title] Timing check
[* black] Fit a new spark plug
[* black] Start her up and go for a ride!
[* black] All being well, the engine should pull cleanly and run well... If it feels fine, give it a good thrashing ;-)
[* icon_note] If it kicks back or pinks, it's too advanced. If it pops & bangs on the overrun and lacks power, it's retarded.
[* black] After your ride, pull the spark plug and look carefully at the earth electrode. You're looking for the heat "telltale" mark to be close to the bend. Close to the plug body = too advanced. Close to the tip = too retarded.
[* black] The original Wipac points plate and advance/retard mechanism are unavailable new (and almost impossible to find second-hand). Hopefully you won't need them again!

画像2

以前の画像はありません

追加