メインコンテンツにスキップ

手順 6 への変更

- Paul Barnfatherによって編集

承認済みの編集 : Paul Barnfather

削除
追加
変更なし

手順ライン

[title] Set the timing
[* black] Turn the engine to exactly 1/4" BTDC (or 3/16" BTDC for a late-model CSR with a 9.5:1 piston) ''on the firing stroke''
[* black] Turn the engine to exactly 1/4" BTDC (or 3/16" BTDC for a late-model CSR with a 9.5:1 piston) ''on the firing stroke''
[* icon_note] One way to find the right timing position is with a 1/2" socket extension down the plug hole together with a dial gauge. Or you can just mark off a suitable peg in the plug hole.
[* black] Without turning the engine, make sure the rotor fixing bolt is loose and turnrotate the rotor until a white timing dot appears exactly under the hole that is ''clockwise'' from the pickup coil
[* black] Without turning the engine, make sure the rotor fixing bolt is loose and turnrotate the rotor until a white timing dot appears exactly under the hole that is ''clockwise'' from the pickup coil
[* black] Tighten the rotor bolt, making sure the crank doesn't move. The timing is now set.