メインコンテンツにスキップ

手順 4 への変更

- Paul Barnfatherによって編集

承認済みの編集 : Paul Barnfather

削除
追加
変更なし

手順ライン

[title] Remove the points and cam
[* black] Take off the points cover
[* red] Remove the points plate screws and lift the plate away
[* light_blue] Remove the cam retaining bolt
[* black] To remove the cam from its taper, you will need a suitable puller
[* icon_note] You can improvise a slide-hammer puller one usingwith one of the long toolbox cover retaining bolts, a washer and a heavy socket
[* black] Screw the puller bolt into the end of the cam and use the slide hammer to shock the cam off its taper.taper
[* icon_note] You can improvise a slide-hammer puller one usingwith one of the long toolbox cover retaining bolts, a washer and a heavy socket
[* black] Screw the puller bolt into the end of the cam and use the slide hammer to shock the cam off its taper.taper