メインコンテンツにスキップ

手順 2 への変更

- Paul Barnfatherによって編集

承認済みの編集 : Paul Barnfather

削除
追加
変更なし

手順ライン

[title] Modify theMake a suitable rotor bolt
[title] Modify theMake a suitable rotor bolt
[* black] The Boyer comes with two different rotor fixing bolts
[* black] You need the 26 TPI one
[* black] Cut the bolt to 15mm
[* black] Now carefully grind awayThe problem here is that both the first 6.5mmend of thread. This will enablethe camshaft and the rotor have the same thread - so the rotor won't tighten up properly onto the taper (and it'll be difficult to rotate freelymove the rotor on the cam whenshaft to set the bolttiming.
[* black] The solution
is fittedto grind away the first 6.5mm of thread of the retaining bolt so youthe rotor can setbe tightened up properly onto the timingtaper.
[* black] Now carefully grind awayThe problem here is that both the first 6.5mmend of thread. This will enablethe camshaft and the rotor have the same thread - so the rotor won't tighten up properly onto the taper (and it'll be difficult to rotate freelymove the rotor on the cam whenshaft to set the bolttiming.
[* black] The solution
is fittedto grind away the first 6.5mm of thread of the retaining bolt so youthe rotor can setbe tightened up properly onto the timingtaper.