メインコンテンツにスキップ

手順16に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Here's an inside look at the projector assembly sans the protective cover.
[* black] Light for projecting images is supplied by a very powerful LED that even has its own heat sink that conductsto conduct heat to the aluminum front panel.
[* black] Light for projecting images is supplied by a very powerful LED that even has its own heat sink that conductsto conduct heat to the aluminum front panel.
[* black] As light leaves the LED (shown in red) it passes through two prisms (shown in orange).
[* black] A good deal of engineered optical reflection allows the light emitted by the LED to reflect through an LCD or SXRD panel (shown in yellow) and head toward the mirror.
[* black] Before bouncing off the angled mirror and exiting the camera, the projected image passes through a focusing lens (shown in blue) connected to the slider on the top panel.