Skip to main content

Changes to Step #16

Edit by Andrew Bookholt

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* black] Here's an inside look at the projector assembly sans the protective cover.
[* black] Light for projecting images is supplied by a very powerful LED that even has its own heat sink that conducts heat to the aluminum front panel.
[* black] As light leaves the LED (shown in red) it passes through two lensesprisms (shown in orange).
[* black] A good deal of engineered optical reflection allows the light emitted by the LED to shinereflect through the image displayed on the tinyan LCD or SXRD panel (shown in yellow).
[* black] Before reflectingbouncing off the angled mirror and exiting the camera, the projected image passes through a focusing lens (shown in blue)blue) connected to the slider on the top panel.
[* black] As light leaves the LED (shown in red) it passes through two lensesprisms (shown in orange).
[* black] A good deal of engineered optical reflection allows the light emitted by the LED to shinereflect through the image displayed on the tinyan LCD or SXRD panel (shown in yellow).
[* black] Before reflectingbouncing off the angled mirror and exiting the camera, the projected image passes through a focusing lens (shown in blue)blue) connected to the slider on the top panel.