メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Arthur Shiさんによる編集

承認済みの編集 : Arthur Shi

変更なし

手順ライン

[* black] When the glass is warm to the touch, apply a suction cup close to the edge.
[* black] Lift on the suction cup and insert an opening pick in the gap.
[* icon_note] If your back glass is badly cracked, [https://d3nevzfk7ii3be.cloudfront.net/igi/2JndriFUmm2FOuHA|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, youYou can also superglue the suction cup to the broken screen.
[* icon_note] If your back glass is badly cracked, [https://d3nevzfk7ii3be.cloudfront.net/igi/2JndriFUmm2FOuHA|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, youYou can also superglue the suction cup to the broken screen.
[* icon_note] If the edge of the glass is cracked, you can try to [https://d3nevzfk7ii3be.cloudfront.net/igi/VOqyLfoSDQnZwJBI|slide an opening pick underneath the crack|new_window=true] and slowly chip the glass out.
[* icon_note] Reapplying heat will help loosen adhesive and make the process easier.