メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順5に変更

Arthur Shiさんによる編集

承認済みの編集 : Arthur Shi

変更なし

手順ライン

[* black] Insert an opening pick into the right edge of the phone and slide it upwards towards the top right clip.
[* icon_note] You do not need to insert the pick more than 2 MMmm into the edge. If you insert the pick all the way in, you may risk damaging flex cables.
[* icon_note] You do not need to insert the pick more than 2 MMmm into the edge. If you insert the pick all the way in, you may risk damaging flex cables.
[* black] Slowly slide the pick past the clip to disengage it from the frame.
[* icon_note] At this point, the right edge of the midframe should be free from the case. If it isn't, slide an opening clip up and down along the right edge.