手順6に変更
手順ライン
| [* black] Before installing or gluing down any new components, remove any remaining adhesive residue from your device. | |
| - | [* black] Peel off larger pieces of adhesive using tweezers or gloved fingers. |
| + | [* black] Peel off larger pieces of adhesive using [product|IF145-020|tweezers] or gloved fingers. |
| [* black] Scrape away any remaining adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction, not back and forth, until all the adhesive residue is gone. | |
| [* icon_note] This can take quite a bit of work, so be patient. | |
| [* black] When your device is clean and dry, go ahead and install your new part and reassemble your device. |