メインコンテンツにスキップ

手順1に変更

thefluffyfistさんによる編集

承認済みの編集 : thefluffyfist

変更なし

手順ライン

[title] Case
[* black] Remove all 16 #10-torx screws from the back side of the case.
[* black] Gently separate the case pieces.
-[* icon_note] A strong magnet helps greatly.
+[* icon_note] A strong magnet helps greatly when taking out the screws.
[* icon_caution] Keep in mind when resembling, the case is plastic so, don't tighten the screws too tight.