メインコンテンツにスキップ

手順1に変更

thefluffyfistさんによる編集

承認済みの編集 : thefluffyfist

変更なし

手順ライン

[title] Case
-[* black] Remove all 16 torx-10 screws from the back side of the case.
+[* black] Remove all 16 #10-torx screws from the back side of the case.
[* black] Gently separate the case pieces.
[* black] A strong magnet helps greatly.
[* black] Keep in mind when resembling, the case is plastic so, don't tighten the screws too tight.