メインコンテンツにスキップ

手順 3 への変更

- Jimmy Baertleinによって編集

承認済みの編集 : Jimmy Baertlein

削除
追加
変更なし

手順ライン

[* black] Finally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Once de-soldered, you are finished!finished.
[* icon_reminder] Ensure that the device is turned off when handling bare wirewire.
[* black] Finally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Once de-soldered, you are finished!finished.
[* icon_reminder] Ensure that the device is turned off when handling bare wirewire.
[* icon_caution] Soldering iron is very hot.
[* icon_note] Re-assemble by following steps in reverse.