メインコンテンツにスキップ

手順 3 への変更

- Jimmy Baertleinによって編集

承認済みの編集 : Jimmy Baertlein

削除
追加
変更なし

手順ライン

[* black] Now that the speaker is ready to come outFinally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Ensure that the device is turned off, because you will beoff when handling bare wire. Once the speaker is completely de-soldered, you are done! Re-assembly is the samefinished! Re-assemble by following steps you just did, but in reverse orderreverse.
[* black] Now that the speaker is ready to come outFinally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Ensure that the device is turned off, because you will beoff when handling bare wire. Once the speaker is completely de-soldered, you are done! Re-assembly is the samefinished! Re-assemble by following steps you just did, but in reverse orderreverse.