メインコンテンツにスキップ

手順1に変更

Bob Greenさんによる編集

承認済みの編集 : yvaneck

削除済み
追加
変更なし

手順ライン

[* red] With your Phillips 1 screwdriver, unscrew the five M2.5x5-mm screws and the five M2.5x8-mm screws that lie underneath the keyboard panel.
[* black] Be aware there are two deeply recessed screws on both sides to the rear of this panel. There are also two screws externally on the rear face either side of the battery that hold the monitor on and pass through this panel, support the screen when you remove these. There are also two screws above the hard drive bay that need to be removed.