メインコンテンツにスキップ

手順2に変更

Jasonさんによる編集

承認済みの編集 : Jason

変更なし

手順ライン

-[* black] Cut the connecting wires.
-[* black] Use a wire-nut or electrician's tape to connect the wires of the replacement power connector. Match colors to each other.
+[* black] Using the scissors on your wire strippers, cut the connecting wires.
+[* black] Using your wire strippers, remove about 1/4 " of the plastic tubing surrounding the end of your exposed wire, careful to not damage the wires.
+[* black] Using a wire-nut or electrician's tape, connect the wires of the replacement power connector to your exposed wires. Connect white wire to white, and black to black.