メインコンテンツにスキップ

手順 1 への変更

- Eric Gaulkeによって編集

承認済みの編集 : Eric Gaulke

削除
追加
変更なし

手順ライン

[* blackred] Remove all 2.5mmthe Phillips 10.0mm and 7.0mm screws holdingon the circuit board tooutside of the case.
[* blackred] Remove all 2.5mmthe Phillips 10.0mm and 7.0mm screws holdingon the circuit board tooutside of the case.
[* icon_caution] Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.