メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Emily Ramirezさんによる編集

承認済みの編集 : Emily Ramirez

削除済み
追加
変更なし

手順ライン

[* black] Turn off and unplug the Keurig before starting.
[* black] OpenLay the Keurig on it's back and then open the lid to view the 21.0 mm screws above the puncture needle.
[* red] Using a Phillips #2 screwdriver, remove the two 21.0 mm screwsscrews using the CR-V PH2 bit.
[* black] OpenLay the Keurig on it's back and then open the lid to view the 21.0 mm screws above the puncture needle.
[* red] Using a Phillips #2 screwdriver, remove the two 21.0 mm screwsscrews using the CR-V PH2 bit.
[* icon_caution] Be careful when removing the screws. There is a sharp puncture needle!
[* icon_note] You may need to use tweezers to get the screws out.