メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順1に変更

Craig Belsheさんによる編集

承認済みの編集 : Craig Belshe

変更なし

手順ライン

[* black] Locate the LED headlight panel on the bottom right section of the board.
[* black] Use a Phillips #2 screwdriver to remove the two 2 mm screws on either side of the LEDs.
[* black] Remove the LED board.
[* icon_note] The LEDs are not symmetrical. This step is for the right side of the board, next to the power button. The left side is covered in the next stepnext.
[* icon_note] The LEDs are not symmetrical. This step is for the right side of the board, next to the power button. The left side is covered in the next stepnext.