メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順4に変更

Richard Suovanenさんによる編集

承認済みの編集 : Richard Suovanen

変更なし

手順ライン

[* red] Locate the five solder locations on the underside of the motherboardgyroscope sensor board.
[* red] Locate the five solder locations on the underside of the motherboardgyroscope sensor board.
[* black] Plug in soldering iron and wait for the tip tip to reach its target temperature.
[* black] Rest the tip of the iron on the solder and wait for the solder to melt. The wire will drop out of the motherboardsensor board.
[* black] Rest the tip of the iron on the solder and wait for the solder to melt. The wire will drop out of the motherboardsensor board.
[* icon_caution] Be aware of where the tip of the soldering iron is at ALL times. Put on safety glasses before picking up the soldering iron. Turn on a fan and face it towards the device to vent harmful fumes away from the solderers face.