メインコンテンツにスキップ

手順 3 への変更

- Billy Phoによって編集

承認済みの編集 : Billy Pho

削除
追加
変更なし

手順ライン

[* black] Use a spudger to lift up one of the small flaps on only one side of the white female connector.
[* black] Pull on the wire toward the lifted side until the white male connector is disconnected.
[* black] Use a spudger to lift up one of the small flaps on only one side of the white female connector.
[* black] Pull on the wire toward the lifted side until the white male connector is disconnected.
[* black] Remove the AMP Board.