メインコンテンツにスキップ

手順 2 への変更

- Billy Phoによって編集

承認済みの編集 : Billy Pho

削除
追加
変更なし

手順ライン

[* black] Use a spudger to flip up the small flap on the ZIF connector.
[* black] Gently pull the ribbon cable out of the ZIF connector.
[* black] Lift the AMP Board gently while sliding the ribbon cable out through the center hole to reveal another set of wireswires underneath the board.
[* black] Lift the AMP Board gently while sliding the ribbon cable out through the center hole to reveal another set of wireswires underneath the board.