メインコンテンツにスキップ

手順3に変更

Kristen Gismondiさんによる編集

承認済みの編集 : Kristen Gismondi

変更なし

手順ライン

[* black] Lower the back panel by pulling it down.
-[* red] Remove one Philips #2 10mm screw.
+[* red] Remove one Phillips #2 10mm screw.
[* black] Use the plastic opening tool to remove the left side panel.
[* icon_note] Flipping the printer onto its side makes it easier to remove the panel and access the motherboard.