手順2に変更
- Austin Culbersonによって編集
承認済みの編集 : Austin Culberson
- 前
- 後
- 変更なし
手順ライン
| [* red] Using your fingers, pull the small plastic tab away from the circuit board/faceplate sub-assembly. | |
| - | [* black] |
| + | [* black] Rotate the faceplate away from the circuit board. |
| [* black] Gently remove the faceplate from the circuit board, taking care to not break the small plastic tab on the other side of the sub-assembly. |