メインコンテンツにスキップ

手順3に変更

Dominik Schnabelrauchさんによる編集

承認済みの編集 : Dominik Schnabelrauch

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* icon_reminder] If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that.
+[* black] Use a suction cup to lift the upper end of the display until you can insert the tip of an opening pick.
+ [* icon_caution] Only insert the tip of the opening to not damage any components beneath the display.
+[* black] Slide the opening pick around all sides of the phone to cut the adhesive.
+[* black] Leave an opening pick in each corner of the phone to prevent the adhesive from resealing.
+ [* icon_caution] Don't lift up the display straight away after you cut the adhesive on all sides. The two display cables are still threaded through the mid frame of the phone.