メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順20に変更

Justinさんによる編集

承認済みの編集 : Justin

変更なし

手順ライン

[* black] Remove the fuel lines from the fuel filter assembly.
[* black] There are three lines - you are only removing two of them.
[* black] Remove the two lines that have plastic connectors on the ends.
[* black] Release the connections by pressing in on the plastic tabs similar to the vent hose connection we did in a previous step.
[* black] The large fuel line has two tabs (one on each side) - I was able to squeeze this with my fingers to remove.
[* black] The small fuel line has one tab - I used a screw driver to push that tab in.
[* black] After you push the tab(s) in, pull the fuel line off.
[* black] Again, these are two different sizes so you can't mix them up when you reinstall them (as long as you workThe third hose on one side atthe fuel filter assembly is fastened by a time likemetal clip - do not remove this guide shows)one. We'll remove the other end of this hose in the next step.
[* black] Again, these are two different sizes so you can't mix them up when you reinstall them (as long as you workThe third hose on one side atthe fuel filter assembly is fastened by a time likemetal clip - do not remove this guide shows)one. We'll remove the other end of this hose in the next step.