メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順5に変更

Juan Seoane-Seriさんによる編集

編集が拒否されました。 : Kristen Gismondi

変更なし

手順ライン

[title] Seperating Bezel and Screen
[* red] Use a heat gun or a heating device to lightly heat the edges of the screen on the phonephone.
[* red] Use a heat gun or a heating device to lightly heat the edges of the screen on the phonephone.
[* black] Insert the spudger between the screen and plastic bezel, then apply pressure to separate.
[* icon_note] You can also push the screen out in the empty slot where the battery waswas, to push the screen out after heating the screen and plastic bezel.
[* icon_caution] It is important to be quick but careful when separating the screen and plastic bezelbezel, because the glue could cool down and result to a re-bonding ofcause the two partsscreen and bezel to bond again.
[* icon_note] You can also push the screen out in the empty slot where the battery waswas, to push the screen out after heating the screen and plastic bezel.
[* icon_caution] It is important to be quick but careful when separating the screen and plastic bezelbezel, because the glue could cool down and result to a re-bonding ofcause the two partsscreen and bezel to bond again.