メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順5に変更

Raul Vides Sarmientoさんによる編集

承認済みの編集 : Adam O'Camb

変更なし

手順ライン

[title] Seperating Bezel and Screen
[* red] Use a heat gun or a heating device to lightly heat the edges of the screen on the phone
[* black] Insert the spudger between the screen and plastic bezel, then apply pressure to separate.
[* blackicon_note] You can also apply pressure topush the screen out in the empty slot where the battery was to push the screen outout after heating the screen and plastic bezel.
[* blackicon_caution] It is important to be quick but careful when separating the two parts since cooling ofscreen and plastic bezel because the glue could result incool down and result to a re bondingre-bonding of the two parts.
[* blackicon_note] You can also apply pressure topush the screen out in the empty slot where the battery was to push the screen outout after heating the screen and plastic bezel.
[* blackicon_caution] It is important to be quick but careful when separating the two parts since cooling ofscreen and plastic bezel because the glue could result incool down and result to a re bondingre-bonding of the two parts.