Skip to main content

Changes to Step #4

Edit by Keoni

承認済みの編集 by Keoni

Deleted
Added
Unchanged

Step Lines

[* black] WIth the screw gone, slide the entire wooden armrest unit to the right (away from the car).
[* black] Once it can not go any further lift straight up out of its spot.
[* black] Before lifting to far reach under and remove the wiring from wire harness the by pinching down on the white tab and pulling straight back.
[* black] Before lifting to far reach under and remove the wiring from wire harness the by pinching down on the white tab and pulling straight back.
[* black] Window control is now removed and you can set the wooden door panel unit aside.