メインコンテンツにスキップ

手順4に変更

Bas Ovinkさんによる編集

承認の保留中

変更なし

手順ライン

[* icon_note] Rotate the mini so that the SuperDrive slot loading mechanism is facing you.
[* black] Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.
-[* icon_caution] Use tweezers to grab the connector (as seen in the picture), ***not the wires***.
+[* icon_caution] Use tweezers to grab the connector (as seen in the picture), ***not the wires***. To prevent tearing the wires you can also wiggle a screwdriver inbetween the connector and its socket.
[* icon_note] The connector is located under the optical drive opening, next to the PRAM battery.