手順4に変更
- Andrew Bookholtによって編集
- 前
- 後
- 変更なし
手順ライン
| [* icon_note] Rotate the mini so that the SuperDrive slot loading mechanism is facing you. | |
| [* black] Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board. | |
| + | [* icon_caution] Use tweezers to grab the connector (as seen in the picture), ***not the wires***. |
| [* icon_note] The connector is located under the optical drive opening, next to the PRAM battery. |