手順1に変更
- Andrew Bookholtによって編集
- 前
- 後
- 変更なし
手順ライン
| + | [* icon_caution] Later in this guide you will remove several recessed Phillips screws. Bit drivers are generally too large to fit in the recesses, so be sure to have a thin shafted Phillips screwdriver on hand. |
|---|---|
| [* icon_note] First remove the AirPort antenna (the larger of the two), located near the power button. | |
| [* black] Slightly squeeze the two retaining arms toward each other and lift the AirPort antenna off its post. | |
| [* icon_caution] Squeezing the two posts excessively will surely break them off the internal frame. Work delicately. | |
| [* icon_reminder] During reinstallation, you will have to slightly squeeze the two posts together so they fit into the openings on the AirPort antenna board. |