メインコンテンツにスキップ

この手順に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Insert wisdom hereRepeat the same procedure as the past few steps for the right side of the mini.
[* icon_note] At this point, there should be a noticeable gap between the bottom and top housing around the perimeter of the mini
.
[* black] Insert wisdom hereRepeat the same procedure as the past few steps for the right side of the mini.
[* icon_note] At this point, there should be a noticeable gap between the bottom and top housing around the perimeter of the mini
.